A scare and a surprise early in the morning
You know that we actively promote our creative and flexible logistics, but here is an example from the day to day that surprised even me this morning:
Every night we drive to the DPD depot in Linz, Austria with our own small transporters, so that we can hand over the packages for the alpine country before midnight. Only via this powerful endeavor (1,100 kilometers every night) can we ensure that our packages will be delivered in Austria the following day.
Last night one of our vehicles was involved in an accident (though not his fault). Thankfully, the driver is ok, except for a few bruises. The accident occurred shortly before 11pm, one hour away from the DPD hub. Instead of driving to the hospital for safety's sake, our driver had the vehicle towed for an entire hour to DPD. Only after all the packages were unloaded in time did he head for the hospital to be checked over. And the packages arrived punctually today at our customers. Mission success. Unbelievable.
It is of course right to say that such "hero's action" is irresponsible, and that personal health trumps everything. If the hospital had found something more seriously wrong, we certainly would not have been happy today. However, the deed greatly impressed me, as did the coordination and decision making during the night. A special commendation to you!
Distribution dynamics: why »cheap at any price« doesn’t work in B2B distribution
»Cheap at any price« may be a great slogan for consumers buying a television once every few years....
»Cheap at any price« may be a great slogan for consumers buying a television once every few years. In B2B distribution, however, it’s one of the most expensive misconceptions there is. Because the distributor with the lowest price is almost never the one that costs you the least. It sounds contradictory, but it's simply a matter of arithmetic.
Take the reseller who consistently buys from whichever distributor has the list price that’s two per cent lower. Sounds perfectly sensible. Until the day the exact device needed for a customer project is out of stock. Suddenly, the end customer is at a standstill, the roll-out is delayed, engineers are booked but left waiting around, and the competition couldn’t be happier. So what did they save? Two per cent on the purchase price. What does the disruption cost? Several times that amount. Product availability isn’t a nice extra – it’s part of the price. It just doesn’t appear on the invoice.
The same applies to everything I’ve covered in this series. Payment terms that give a reseller breathing space. Credit facilities that keep the business moving. An RMA process that replaces a faulty unit quickly instead of leaving them waiting for three weeks. Configuration services that save valuable time. A knowledgeable person on the end of the phone who actually understands the product. Every one of these things has value – and the cheapest supplier is often the one that’s cut back on exactly these areas so the price on paper looks more attractive. You'll still pay the difference. Just later, somewhere else, and usually at a much higher cost.
I’ll say this quite openly, even if it goes against the stereotype of my own industry: distribution isn’t a price war – it’s a business built on trust, with a price tag attached. If you buy purely based on price, you train your suppliers to behave in exactly the way you least want them to. They cut back on service, inventory, accessibility and support, because suddenly everything revolves around the second decimal place. Then everyone acts surprised when nobody is there when it really matters.
Don’t get me wrong: price matters. We fight every day to remain competitive, and any distributor that’s consistently overpriced deserves to lose business. But price is only one variable among many – not the only one. The real question isn’t »How much does the box cost?« It’s »What will this business actually cost me in the end – including the days when things go wrong?« That’s the principle of total cost of ownership, and when you look at the total cost, the cheapest option is rarely the most economical.
The truly good buyer understands this. They negotiate hard on price – and still buy from the supplier they know will deliver when the pressure is on. Both at the same time. That's not sentimentality; it’s professional procurement.
So remember this: »The cheapest supplier is the one with the smallest invoice – and the biggest hidden costs.«
Distribution mechanics: broadliner vs specialist – why »everything for everyone« doesn’t work for us
There are two archetypes of distributors, and they could hardly be more different from each other....
There are two archetypes of distributors, and they could hardly be more different from each other. One is the broadliner: a gigantic catalogue, from hard drives and toner to network switches, hundreds of thousands of products, »everything for everyone«. The other is the specialist: a clearly defined world – in our case AIDC and POS, meaning scanners, mobile computers, label printers, point-of-sale systems and security – but with expertise at every level. Both call themselves distributors. And both are playing an entirely different game.
The broadliner lives by scale. Its advantage is breadth: a reseller gets everything from a single source, one invoice, one delivery, one login. That is convenient and exactly right for many standard products. The price paid for that is depth. If you stock 200,000 products, it is simply impossible to have someone in-house for each one who knows which scanner will still read at minus 20 degrees in a cold store, which printhead matches which label material, and why that one particular terminal causes problems during a rollout in France. For the broadliner, the product is a line in the catalogue. For the specialist, it is a craft.
And this is exactly where »everything for everyone« fails in our niche. Our products are not self-explanatory. A scanner is not simply a scanner – there are dozens of variants, accessories, cradles, firmware versions, configurations and industry-specific solutions. A specialist reseller equipping a warehouse worth half a million or planning a rollout across 3,000 stores does not want to talk to an ordering portal. They want someone who genuinely knows the products, who configures them, stages them, provides training, has RMA under control, and tells them when a particular device is the wrong choice for their application. That level of depth cannot be spread evenly and thinly across 200,000 products.
I do not want to criticise the broadliner – in high-volume business with products that require little explanation, it is unbeatable in terms of efficiency, and that is exactly where it belongs. But our industry is not a high-volume business with products that require little explanation. It is a solutions business. And a solutions business rewards those who master a few things exceptionally well, not those who are just somewhat proficient at many things.
That is why we deliberately chose depth over breadth. Not because we could not build a larger catalogue, but because in our world, »we do that as well« almost always means »we simply do it less well«. We would rather represent 40 manufacturers we know inside out than 400 where all we can look up is the price and availability. That is not modesty – it is strategy.
Incidentally, the market sorts this out by itself. In the long run, size wins in the standard business, while depth wins in the solutions business. Those who try to be both at the same time usually get squeezed in the middle: too small for the battle of scale, too broad for genuine expertise.
So remember: »Everything for everyone ultimately means nothing done properly for anyone.«
Distribution mechanics: why non-stocking distributors exist – and why they aren’t really distributors
In my article about selling directly to end users, I briefly mentioned the term non-stocking distributor....
In my article about selling directly to end users, I briefly mentioned the term non-stocking distributor. Today, it deserves an article of its own, because it is a fascinating creature: a distributor that leaves out the warehouse. In other words, it leaves out precisely the part that makes distribution… distribution.
So what does a non-stocking distributor actually do? It receives an order, passes it on to the vendor, has the goods shipped directly or cross-docked, and earns the difference. No warehouse, no capital tied up in inventory, no safety stock, no inventory management at three o’clock in the morning. On paper, it sounds wonderfully lean.
And in some industries – software, licences, cloud subscriptions – it genuinely is. There is simply nothing to store. A perfectly respectable business model.
The problem is that our world is different. We deal with scanners, printers, mobile computers, POS terminals and cables. In this business, the warehouse is not an optional extra – it is the very heart of the service. Think back to everything I have written throughout this series: financing inventory, extending credit terms, providing the last mile, breaking down pallet loads into three printers and a single cable for delivery by tomorrow morning, price protection on physical stock, project inventory reserved on the shelf for months at a time. Every one of those services depends on having inventory.
Remove the warehouse, and you are not removing the inconvenient part of the business – you are removing the business itself.
That is why I will make a deliberately provocative statement: In the hardware industry, a non-stocking distributor is not really a distributor at all. It is an intermediary. A broker. A forwarding office with letterhead. There is nothing dishonourable about that – but it is a different business. It does not carry inventory risk. It does not finance stock. It cannot deliver tomorrow morning because it has nothing today. The difference becomes obvious the moment the vendor cannot supply, quarter-end demand overwhelms the supply chain, or a customer suddenly needs 200 units immediately. That is precisely the moment when you discover the difference between someone who actually has the goods – and someone who merely promises them.
There is another honest point to consider. The warehouse is also the reason distribution earns its margin. If you tie up no capital and carry no inventory risk, there is no justification for earning a genuine distribution margin. A non-stocking distributor survives on an extremely thin brokerage spread and is usually the first casualty of a price war or a supply shortage. Warehousing is expensive. But it is also the moat that protects the business.
Please do not misunderstand me. There are market segments where a non-stocking model is exactly the right solution. But if you put the word distributor on the door while leaving out the warehouse, you are selling the label rather than the service.
And that is precisely why vendors should stop relying on this form of distribution. These so-called distributors weaken the channel rather than strengthen it.
And remember:»A distributor without a warehouse is like a bank without a vault – the sign may be correct, but the substance is lacking.«
Distribution mechanics: what a »project price« really is
I’ve already written about how project pricing is funded – today, let’s look at the question that comes before that: Why are there three different prices for exactly...
I’ve already written about how project pricing is funded – today, let’s look at the question that comes before that: Why are there three different prices for exactly the same scanner? One customer pays €180, the next pays €140, and a third customer in a large-scale rollout pays €95. Same device, same box, same packaging. To an outsider, this looks arbitrary. In reality, it is the exact opposite: a carefully designed system called deal registration.
Let’s start at the beginning. A reseller identifies an end user who needs 2,000 scanners. They do the work: consulting, testing, calculating, integrating, and ultimately winning the project over three competitors. That process costs time and money – it is often weeks before a single device is ordered. If that reseller ended up paying the same price as a walk-in customer buying a single unit off the shelf, all that effort would have been pointless. This is precisely what deal registration prevents. The reseller registers the project with the manufacturer, and the manufacturer approves a special price – the project price – exclusively for that specific project and that specific partner.
A project price is therefore not a volume discount in the supermarket sense. It is protection. It rewards the partner who developed the opportunity and prevents another reseller from stepping in at the last minute with the same device priced two euros lower, walking away with the deal and all the credit for someone else’s work. Without this mechanism, every reseller investing in project development would risk being overtaken by a freeloader. Eventually, no one would invest in developing projects at all. For the manufacturer, that would be the worst possible outcome.
This is where we, as a distributor, come into the picture. We act as the neutral party in the middle. We know which partner has registered which project, we load the project price into our systems, and we supply that specific partner at that specific price – while everyone else receives the standard price. Three prices for one product are therefore not a sign of chaos. They simply reflect three different business situations: list business, partner pricing, and registered project pricing. Each price tells a different story about the amount of work, risk, and commitment behind the scenes.
Of course, the system is occasionally stretched. Someone registers a »project« consisting of a single device. Two partners claim the same end customer. Or a registered project suddenly reappears through a competitor. That is when things become uncomfortable, and that is when we find ourselves right in the middle of the arbitration process. But none of this changes the principle of the matter: deal registration is the reason why it remains worthwhile in our industry to develop projects rather than merely move boxes.
So the next time you see three prices for the same scanner and think »arbitrary«, you have it backwards. A single uniform price would be the arbitrary solution. The three prices are the fair one.
And remember: »Three prices for one device are not chaos – they are the receipt showing who did the work.«